Well i do a project, i Switch a LED ON/OFF over the Network, Dude DUuuuuhhh,
Visit counter For Websites

Your Data is Your Data.
last update:

ESP32-CAM_MJPEG2SD InBrowser Web Flash Install on ESP32-CAM with USB Shield

This project allows for the in-browser installation of the ESP32-CAM_MJPEG2SD software on an ESP32-CAM module.
with ESP32-CAM-MB USB port Shield
FTDI users can also Flash it from this page, get ESP into Flashing / Programming mode and use install button
or
ESP32-S3 WROOM-1 N16r8 ? 16mb? SD-Card Slot, Dual USB type C Camera
Pinout looks similar as Freenove_ESP32_S3_WROOM Camera

Based on https://github.com/s60sc/ESP32-CAM_MJPEG2SD


install instruction Video


ESP32-CAM_MJPEG2SD
Needs an SD-Card with 2 files for the webserver in /data Directory
Or Not

Not sure but if internet connection is present it might download the files automaticly to SD-Card
only check Host Name == mDNSname in config, maybe change it to test so it becomes http://test.local

Create an SD-Card with /data directory
Save next 2 raw files to the SD-Card in a directory /data


https://github.com/ldijkman/async-esp-fs-webserver/tree/master/docs/ino/ESP32-CAM_Camera_Webserver/BIN/data
correct path to the files on the SD card ( /data/MJPEG2SD.htm and /data/common.js).
insert SD-Card in Slot on ESP32-CAM

(would be better / easier if these files where on spiffs/littlefs (got 1mb unused? the 2 files are 140Kb)
Star


install from PC Chromium based Browsers, Google Chrome Chromium , Edge Chromium, Opera Chromium.

Connect USB powerup with Button IO0 pressed
To enter programming mode


Next Needs SD-Card
/data/MJPEG2SD.htm
/data/common.js
You could insert a blank SD-Card, webserver files will be downloaded from my Github
to SD-Card when internet connection is configured / present
Ah Damn, your browser doesn't work!
Open this Page in a Chromium Based PC Browser!
and an Connect Install button will be here! Ah Damn, you are not allowed to use this on HTTP!



Next Does NOT use SD-Card
#ifdef SIDE_ALARM #define STORAGE LittleFS
Ah Damn, your browser doesn't work!
Open this Page in a Chromium Based PC Browser!
and an Connect Install button will be here! Ah Damn, you are not allowed to use this on HTTP!
Pitty, it should detect presence of SD-Card, and use it if present


When Finished, PowerCycle Reboot by,
DisConnect USB, Wait a Sec. and ReConnect USB

RST on USB Shield does not work

in install instruction Video, i used powercycle, disconnect USB and reconnect USB to Reboot
because the RST Button on camera print is a bit hard to reach / operate with USB port shield mounted
ESP32-CAM Schematic RST pin is not on Header pins so RST USB port shield is not connected to ESP32-CAM RST
View ESP32-CAM Pinout


Then connect wifi direct to AP AccessPoint "ESP-CAM_MJPEG......."
Browse to http://192.168.4.1 and configure wifi
Config = 🔧 Wrench key Button 🔧


Human Friendly mDNS is set to http://test.local
For NO SD-Card Version

not http://test.local => lookup IP or mDNS in Serial Monitor or Android Bonjour Browser maybe http://ESP-CAM_MJPEG_B.local


config Wrench key button 🔧 Host Name sets mDNS name Adress .local is added by ESP


the ESP32-CAM_MJPEG2SD Webserver is maybe not so Human Friendly, it says This URI does not exist, not sure why yet



ESP32-CAM with ESP32-CAM-MB usb port shield
https://www.google.com/search?q=ESP32-CAM

ESP32-CAM with ESP32-CAM-MB usb port shield
https://www.google.com/search?q=ESP32-CAM



🔧 config 🔧
Host Name = test becomes http://test.local
SSID = wifi router name broadcasted in the Air
Password = wifi router password


Install instruction Video


Install instruction Video



ESP32-S3-CAM Newer S3 Version

ESP32-S3-WROOM-1 N16r8

i ordered this one from AliExpress ESP32-S3-CAM

Ordered one

no install button yet


onboard LED looks like WS2812 multiled, think not supported by mjpeg2sd

Another Board / Another install Button
ESP32-S3 WROOM-1 N16r8 ? (detect say 16mb) With SD-Card Slot, Dual USB

Pinout looks similar as Freenove_ESP32_S3_WROOM



i ordered this one from AliExpress ESP32-S3 WROOM-1 N16r8

Connect USB to the port labeled USB-UART
no need to press buttons

onboard LED looks like WS2812 multiled, think not supported by mjpeg2sd





Find your ESP Easy!

Android Phone / Tablet, Discover ESP mDNS Devices Easily on Your Local Network:
Easy find ESP mDNS devices in your local network, linked list
Android Phone / Android Tablet, Scan local network for ESP mDNS devices, linked list with mDNS and IP adress
NOTE: Android Phone or Tablet and ESP must be Connected to the same WifI Router Network
Open Bonjour Browser on Google Play
--
Easy find ESP mDNS devices in your local network, linked list
Android Phone / Android Tablet, Scan mDNS local network for devices link list
Open Bonjour Browser on Google Play

if your Windows PC cq Browser does not support mDNS .local adresses in Browsers URL location Adress bar input
Sounds silly but mDNS is an Apple thing
install itunes to get mDNS working in Windows Browser
Visit Apple iTunes



Stream only in browser http:// IP or mDNSName.local /sustain?stream=0
http://test.local/sustain?stream=0
http://esp-cam_mjpeg_b.local/sustain?stream=0

Stream only in browser http:// IP or mDNSName.local /sustain?stream=0
http://test.local/sustain?stream=0
http://esp-cam_mjpeg_b.local/sustain?stream=0


ESP32-CAM_MJPEG2SD In-Browser Web Flash Install on ESP32-CAM

This project allows for the in-browser installation of the ESP32-CAM_MJPEG2SD software on an ESP32-CAM module.
with ESP32-CAM-MB USB port Shield
For detailed instructions, source code, and additional resources,
visit the project's GitHub repository:

ESP32-CAM_MJPEG2SD on GitHub



randomnerdtutorials.com/esp32-cam-troubleshooting-guide
ESP32-CAM Troubleshooting Guide


Ai-Thinker Technology
ESP32-CAM camera development board


Photos from CAM's around the World?

Send Photos / ScreenShots of your CAM? with location?



Some Say where is ESP32-S3-CAM, Freenove ESP32-S3-WROOM Board, ESP32 Wrover
Well, Send me Boards?, and i will try to add an install button

L. Dijkman
Bangert 30
1619GJ Andijk
The Netherlands



a Penny For Sharing my Thoughts.




mplayer http://test.local/sustain?stream=0
No Abonnement, No Subscription Fees
Your Data is Your Data, you do not need a Peeking Pooh in Your Data
Motion Project, highly configurable programs that monitor video signals

Video DoorBell?

how to send a wake up notify signal to android phone